Bonnell Mid-Weight Series Snow Plow


Bonnell Mid-Weight Series Snow Plow

Mid Weight Snow plow is available in 9’, 10’, 11’, and 12’ lengths and 36” tall or 42” tall.


The Mid Weight Straight Moldboard snow plow is specifically designed to efficiently remove snow in and around obstructions often found in urban areas. All snow plow models feature a moldboard adjustable in pitch to four different angle settings. Proper moldboard position is assured through the use of two rugged compression springs.


  • The Mid Weight Snow Plow comes in straight steel, with (4) table to moldboard hook-up points, and (6) 3/8” thick x 4” tall vertical ribs.
  • The Mid Weight Snow Plow push table is constructed out of 3/8” formed plate steel.
  • The Mid Weight Snow Plow average weight is approximately 1541lbs.
  • Moldboard thickness: 10 Gauge
  • Adjustable Moldboard Pitch Settings: 10, 15, 20, 25 degrees off vertical
  • Lower Reinforcing Angle: 4x4x 3/8” thick and fully boxed with 3/8” plate
  • Reversing Frame: 3-1/2”x3-1/2” x 3/8” A36 plate
  • Diameter of Hinge pins: 1-1/4”
  • Reversing Cylinders: 3” Bore x 10” stroke (3”Rod) Single Acting
  • Reversing Limits (left & right): 0 to 35 degrees
  • Moldboard to push table hinge points: (4) spanning 86”
  • Cutting Edge: 5/8 thick x 6” tall High Carbon Steel Std. Punch
  • Cylinder Anchor Pins: 1” C1045