Bonnell Metropolitan Series Snow Plow
The Metropolitan Snow Plow has a extended roll moldboard that is designed to send the snow back to the ground and out of the vision of the operator. The Metropolitan Snow Plow is built standard in 10’ 11’ and 12’ lengths and 36” or 42” tall. The Metropolitan Snow Plow can be constructed in three different lengths, two different heights, with four different styles of moldboards.
Features
- 10-Gauge steel construction with extension springs
- 10-Gauge steel construction with compression springs
- Poly construction with compression springs
- 10-Gauge steel construction with torsion trip edge
- 10-Gauge steel construction tapered with torsion trip edge
- 10-Gauge steel construction distant discharge with extension springs
- The Metropolitans Snow Plow average weight is 1,805lbs
- Lower Reinforcing Angle: 7”x4”x1/2” fully boxed with 3/8”x 6-3/4” plate
- Reversing Frame: 5”x3-1/2”x1/2” angle iron sector
- Reversing Limits (left & right): 0 to 35 degrees with positive stops
- Snow Plow to Table Hinge Points: (5) 1-1/4” hinge pins, spanning 90” with 3” bearing of surface
- Snow Plow Cutting Edge: 5/8”x6” high carbon steel Std. punch
- Pivot Pin Table to Moldboard: 1-1/4” grade 8 bolt
- Cylinder Pins: 1” C1045 steel pins
- Snow Plow Moldboard Thickness: 10 gauge(optional 7gauge)
- Snow Plow Moldboard Reinforcing: (7) ½” thick x3” tall
- Adjustable Moldboard Pitch Setting: 25, 15, or 5 degrees off vertical
Downloads
